We have a large range of co-rotating Twin Screw Extruders covering diameters of 12, 16, 20, 26 and 36 mm, all available with an L/D ratio up to 60. The 12, 16, 20 and 26 mm extruders are supplied with clamshell barrels and with high strength tool steel barrel inserts. The smaller sizes of our twins are mainly for laboratory application and are suitable for developing new formulas and to produce samples for your customer. Our larger 26 mm twin is used both for lab and small production runs and our largest 36 mm twin is use mainly for production. This latter version have a very large output of up to more than 250 kg/hr. In addition we also have a 26 mm combi twin which has interchangeable screws and quick change gear box so it can be used for both Counter and Co-rotating applications.
Our Pharmatech co-rotating twin screw extruders is made with a complete modular buildup of the clam shell barrel, where each barrel section have a length of 5D or 60 mm. Twin Screw Pharma extruders is available 0with diameters of 12, 16, 20 and 26 mm. The compounder is available in barrel lengths from 25 to 40 L/D and with AC vector motor drive power.
Laboratory and pilot plant variable speed fluid high-speed mixers in high polished stainless steel.
Our range of pelletizing systems are complete with the introduction of our new Under Water pelletizing system which are suitable for our 20 and 26 mm twins as well as our 45 mm single screw extruders.
Strand Pelletizers are available from our smallest version with only a few kg output to over 400 kg/hr. And the unique SideCut Pelletizer that can cut anything a pair of scissors can, from the softest TPE to the most rigid engineering polymers. Available in many sizes with output of up to 900 kg/hr.